Created at: May 29, 2025 00:04
Company: Veterans Health Administration
Location: Oklahoma City, OK, 73101
Job Description:
The Oklahoma City VA Health Care System, Clinical Engineering Department, is currently recruiting for one (1) Biomedical Equipment Support Specialist in Oklahoma City, OK. This position may require occasional travel for training purposes as necessary to fulfill service requirements. Occasional local travel within the Oklahoma City catchment area to clinics may be required to support clinic operations.
Applicants pending the completion of educational or certification/licensure requirements may be referred and tentatively selected but may not be hired until all requirements are met. Basic Requirements: United States Citizenship: Non-citizens may only be appointed when it is not possible to recruit qualified citizens in accordance with VA Policy. English Language Proficiency. Candidates will not be appointed under authority of 38 U.S.C. chapters 73 or 74, to serve in a direct patient-care capacity in VHA who is not proficient in written and spoken English. See Chapter 2, section D, paragraph 5a, this part. May qualify based on being covered by the Grandfathering Provision as described in the VA Qualification Standard for this occupation (only applicable to current VHA employees who are in this occupation and meet the criteria). Experience and Education- Associates or higher degree in the biomedical technology or biomedical engineering field; OR Associates or higher degree in electronics, a field of information technology, or engineering (other than biomedical engineering) AND 1 year of creditable experience; OR Completion of the Department of Defense (DOD) biomedical equipment technician training program; OR Completion of a DOD training program in repair and maintenance of electronic systems or information technology AND 1 year of creditable experience; OR Completion of a biomedical engineering technician or Healthcare Technology Management (HTM) certificate program that included an internship or apprenticeship; OR Completion of biomedical engineering technician or HTM certificate program that did not include an internship AND 1 year of creditable experience; OR Hold or having ever held certification as a Certified Biomedical Equipment Technician (CBET), Certified Radiology Equipment Specialist (CRES), Certified Laboratory Equipment Specialist (CLES), or Certified Healthcare Technology Manager (CHTM). Continuous maintenance of certification is not required throughout VHA employment. Grade Determinations: In addition to the basic requirements for employment, the following criteria must be met when determining the grade of candidates: Biomedical Equipment Support Specialist, GS-5 (Entry Level) Experience or Education. None beyond basic requirements. Biomedical Equipment Support Specialist, GS-7 At least one year of experience equivalent to the GS-5 grade level. AND Demonstrated Knowledge, Skills, and Abilities (KSAs). In addition to the experience above, the candidate must demonstrate all of the following KSAs: Knowledge of physics, anatomy, and physiology. Knowledge of electronics such as analog, digital, and microprocessor theory. Knowledge of the use of standard level test equipment such as multi-meters, electrical safety analyzers, patient simulators, storage oscilloscopes, manometers, and tachometers. Knowledge of basic networking concepts, such as computer and server hardware and software functionality, information technologies and computer virus protection software, available software patches and upgrades, and information security tools (for example, Microsoft Office, Windows operating systems, and McAfee). Skill in documenting all services provided in support of medical equipment and clinical systems in a computerized maintenance management system. Ability to learn equipment operating and maintenance procedures. Biomedical Equipment Support Specialist, GS-9 At least one year of experience equivalent to the GS-7 grade level. AND Demonstrated Knowledge, Skills, and Abilities (KSAs). In addition to the experience above, the candidate must demonstrate all of the following KSAs: Knowledge of basic networking concepts including Access Control List (ACL), Transmission Control Protocol/Internet Protocol (TCP/IP), and Virtual Local Area Networks (VLAN). Knowledge of computer and server hardware and software functionality including virus protection, operating system patches and upgrades, and information security tools. Ability to interpret a variety of technical data such as schematic drawings, wiring diagrams, table charts, mathematical expressions, and formulas. Ability to use standard level test equipment including multi-meters, electrical safety analyzers, patient simulators, storage oscilloscopes, manometers, and tachometers. Ability to perform equipment maintenance and operating procedures. Biomedical Equipment Support Specialist, GS-11 (Full Performance Level) At least one year of experience equivalent to the GS-9 grade level. AND Demonstrated Knowledge, Skills, and Abilities (KSAs). In addition to the experience above, the candidate must demonstrate all of the following KSAs: Knowledge of standards including National Fire Protection Association (NFPA), Food and Drug Administration (FDA), the Joint Commission (TJC), and the Association for the Advancement of Medical Instrumentation (AAMI) for safe operation of medical equipment and clinical systems. Skill in using test and calibration equipment including digital multi-meters, electrical safety analyzers, defibrillator analyzers, patient simulators, manometers, tachometers, and Local Area Network (LAN) analyzers. Skill in interpreting a variety of technical data including schematic drawings and wiring diagrams. Skill in applying networking principles, such as Access Control List (ACL), Transmission Control Protocol/Internet Protocol (TCP/IP), and Virtual Local Area Networks (VLAN). Ability to perform advanced testing to troubleshoot medical equipment and clinical system interfaces. Ability to maintain medical computers and software. Ability to manage projects involving medical equipment and clinical systems. References: VA Handbook 5005/95 Part II Appendix G-49 The full performance level of this vacancy is GS-11. The actual grade at which an applicant may be selected for this vacancy is in the range of GS-5 to GS-11. Physical Requirements: See VA Directive and Handbook 5019, Employee Occupational Health Service.
The Biomedical Equipment Support Specialist (BESS) works in support of the medical equipment management program. Troubleshoots and performs planned maintenance on medical devices and clinical systems under frequent supervision. Major Duties and Responsibilities: Assists in lifecycle management of medical equipment and clinical systems. Troubleshoots medical equipment and clinical systems using a variety of technical data and completes corrective action. Performs planned maintenance on medical equipment and clinical systems. Assists with incoming inspections on medical equipment and clinical systems. Documents all work in the Computerized Maintenance Management System (CMMS). Assists with remediation and documentation of hazard alerts and recall notifications concerning medical equipment impacting the facility. Provides customer support to staff, evaluates issues and needs, responds with solutions, and keeps customers abreast of status. Complies with applicable standards, policies, procedures, and regulatory requirements. Spends a significant amount of time working with more experienced BESS and/or Biomedical Engineers to learn and develop technical and professional skills and knowledge. Utilizes basic networking concepts in accordance with the VHA Medical Device Protection Program (MDPP), such as computer and server hardware and software used in conjunction with medical devices and clinical systems. Utilizes test equipment in accordance with manufacturer instructions. Provides customer support to staff, evaluates issues and needs, responds with solutions, and keeps customers abreast of status Educates staff on the safe operation and user-level maintenance of medical equipment and clinical systems. Performs incoming inspections and planned maintenance on medical equipment and clinical systems. Monitors system backups, ensures network connectivity, mitigates cybersecurity vulnerabilities, and maintains clinical systems. Coordinates and works effectively with other facility support departments including but not limited to Facilities Management Service (FMS), Office of Information Technology (OIT), Patient Safety, Sterile Processing Service (SPS), Logistics, Contracting, Informatics, and Environmental Management Service (EMS) Maintains and enhances knowledge in technological advancements through professional development and technical training. Serves as a Contracting Officers' Representative (COR) and/or purchase card holder. Collaborates with Logistics and Contracting to procure parts and services. To provide equipment support to the outpatient clinics, incumbent must possess and maintain a valid state driver's license for this position for traveling from the main facility to the outpatient clinics. Travel for this position typically does not include overnight travel unless incumbent is traveling to off site technical training course(s). May be required to be part of an on-call rotation as part of this position which involves being on-call or on standby for after hours, weekends, and holidays emergency call outs to repair critical medical equipment. Work Schedule: Monday - Friday 7:30 a.m. - 4:00 p.m. Compressed/Flexible: Not Authorized Telework: Not available Virtual: This is not a virtual position. Functional Statement #: 53478-A, -53479-A, 53480-A, 53481A Relocation/Recruitment Incentives: May be authorized according to agency policy. Permanent Change of Station (PCS): Not Authorized