The position is at the full performance level located in the Department of Veterans Affairs (VA), Veterans Health Administration (VHA), at the VA San Diego Healthcare System, VA Medical Center (VAMC) in the Engineering Service, Structural Shop, Maintenance & Repair Section. The primary purpose of the position is to serve the Veteran under the supervision of the Supervisor, Structural Shop. This includes the functions of the Structural Shop at the VA San Diego Healthcare System.
To qualify for this position, applicants must meet all requirements by the closing date of this announcement. EXPERIENCE: A specific length of training and experience is not required, but you must show evidence of training or experience of sufficient scope and quality of your ability to do the work of this position. Evidence which demonstrates you possess the knowledge, skills, and ability to perform the duties of this position must be supported by detailed descriptions of such on your resume. Applicants will be rated in accordance with the OPM Federal Wage System Qualification Standards. SCREEN-OUT ELEMENT: Your qualifications will first be evaluated against the prescribed screen out element, which usually appears as question 1 in the on-line questionnaire. Those applicants who appear to possess at least the minimal acceptable qualification requirement are considered for further rating; those who do not are rated ineligible and are eliminated. The potential eligibles are then rated against the remainder of the Job Elements: Equipment Assembly, Installation, Repair Interpret Instructions, Specifications (includes blueprint reading) Materials Technical Practices Use and Maintain Tools and Equipment Without more than normal supervision Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religions; spiritual; community; student; social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Note: A full year of work is considered to be 35-40 hours of work per week. Part-time experience will be credited on the basis of time actually spent in appropriate activities. Applicants wishing to receive credit for such experience must indicate clearly the nature of their duties and responsibilities in each position and the number of hours a week spent in such employment.
The Maintenance Mechanic performs at journeymen level a variety of woodcrafters, carpentry, asbestos containment, masonry, locksmith, painting and roofing tasks where fit, accuracy and space are essential and structural soundness and appearance is essential. Major Duties: Performs the full range of journey level duties associated with a variety of woodcrafters (15%), carpentry (20%), asbestos containment (20%), masonry (5%), locksmith (15%), painting (15%) and roofing (5%) tasks where fit, accuracy and space are essential and structural soundness and appearance is essential. Will work with cabinetry, furniture, orthopedic devises for use in medical offices and other uses. Tasks will require constructing, altering, repairing, and modifying items made of metal, wood, and wood substitutes. Will make site inspections and determination of process to isolate asbestos containing materials prior to the breach of any asbestos containment barrier. Employee will construct and oversee asbestos barriers on job sites. Tasks will also include making sure that qualified vendors/employees conduct air sampling prior, during and after completion of asbestos containment work when deemed necessary by the Safety Office. Builds fixtures, shelving, cabinets, interior walls, laths, sheathing, floors, ceiling, and stairs with verbal and/or drawings. Installs window frames, doors, outside trims, inside trims. Maintains, repairs, and alters the interior and exterior structures built from concrete, block, ceramic tiles by preparing and spreading mortar or adhesive; cutting, shaping, and laying blocks and tiles; and finishing joints. Performs plastering duties: Makes plaster and applies to walls and ceilings, taking into consideration type of lathing, required thickness, weather conditions, etc. Lays on scratch coat and examine for dryness before applying next coat. Fits creeds to edges and corners; scores surfaces for finishing coat. Skims finish coat on with trowel and works over with wet brush to produce smooth surface. Smooth angles and corners with trowel and float. Textures finish with stipple brush, rubber sponge or paper. Paints a variety of surfaces, such as interiors and exteriors of buildings and/or stationary mobile equipment, where appearance as well as surface protections are important. Prepares surfaces, mixes paints and applies primer, intermediate and finish coats with brush, roller or spray gun. Uses gloss, semi-gloss and special paints, enamels, varnishes, stains, lacquers and shellacs. Uses tools and power equipment such as handsaws, power saws, skill saws, scaffolding, and fine surface materials, including blocks, tiles, metal, wood and wood substitutes. Is responsible for maintaining tools and equipment in good working condition. Resolves problems in the installation and repair of systems furniture and non-modular furniture. Assembles, delivers and performs limited repairs to office type furniture that is not modular in natures. Work Schedule: Monday- Friday, 6:00am-2:30pm Position Description Title/PD#: Maintenance Mechanic/PD11936A Physical Requirements: May handle or carry weights up to 90 pounds, and occasionally more. Assistance is usually available for handling of heavier material and equipment. Heavy exertion is required at frequent intervals. Work requires pushing, pulling, lifting, reaching, walking, climbing, stooping, ability for normal mental and muscular coordination simultaneously, normal hearing and vision. Must have physical capabilities for working inside and outside in excessive heat and cold, noise, confined areas, inclement weather and on intermittent slippery or uneven surfaces that can be found at or in transit to or from work sites. May receive minor cuts and abrasions while performing these duties. Must be able to work from ladders and platforms, and work in awkward and uncomfortable positions. Working Conditions: Incumbent may be assigned to work in areas/confined spaces where certain potentially harmful physical and chemical agents are present. These agents may include, but are not limited to fumes, dust, noise, heat, ionizing, and non-ionizing radiation, chemicals, etc. To ensure employee safety and health, personnel protection programs are maintained consistent with applicable laws and regulations. Incumbent will be required to wear respirators and must be physically able to perform assigned work tasks as directed above and operate safety equipment. Pulmonary function test, chest ex-ray, completion of personal history questionnaire, and a physical evaluation conducted by a physician is required prior to start and then annually. Incumbent will work a regular tour of duty, may work overtime, nights or weekends. Incumbent will be exposed to asbestos containing areas. Incumbent must follow VASDHS Medical Center Memorandum 00-52, Airborne Asbestos Protection.